1932 Washington Quarter Value: Complete Price Guide (P, D, S)
1932 Washington Quarter values: $8-$143,750. Key dates 1932-D and 1932-S worth $75-$143,750. Complete grading guide, varieties (DDO FS-101), and authentication tips.
The 1932 Washington Quarter is worth $8 to $143,750, with values determined by mint mark and grade.
- 1932-P (Philadelphia): $8 – $40,250 (common date, affordable in circulated grades)
- 1932-D (Denver): $75 – $143,750 (conditional rarity, extremely valuable in Mint State)
- 1932-S (San Francisco): $75 – $45,500 (lowest mintage, key date but more available than 1932-D)
The 1932-D and 1932-S are the two most valuable coins in the entire Washington Quarter series (1932-1998). All 1932 quarters contain 90% silver with a melt value of approximately $8.81, but numismatic value always exceeds this floor.
What's Your 1932 Quarter Worth?
Select your coin's mint mark and condition to get a value estimate.
Focus on choosing the right sales channel to maximize your return.
Expected: ()
1932 Washington Quarter: The Inaugural Year of an American Icon
The inaugural 1932 Washington Quarter featuring John Flanagan's design
The 1932 Washington Quarter marks the beginning of the longest-running U.S. coin design in history. Originally intended as a one-year commemorative honoring the 200th anniversary of George Washington's birth, the design proved so popular that it permanently replaced the Standing Liberty Quarter. Today, the series continues with the America the Beautiful and American Women Quarters programs.
The year 1932 produced two of numismatics' most sought-after key dates: the 1932-D and 1932-S. While the San Francisco issue boasts the lowest mintage (408,000 coins), the Denver issue is the superior conditional rarity, with significantly higher values in Mint State grades due to its much lower survival rate in uncirculated condition. Even the common Philadelphia issue becomes a trophy coin in Superb Gem (MS-67) condition, with only 16 examples certified at that level.
This comprehensive guide covers authentication, grading, die varieties (including the valuable FS-101 Doubled Die Obverse), mint errors, and market values for all three 1932 Washington Quarter issues.
Identifying Your 1932 Washington Quarter
The 1932 Washington Quarter was the sole quarter design issued that year, as the Standing Liberty series had been discontinued in 1930 and no quarters were minted in 1931. All 1932 quarters share the same design by John Flanagan, modeled after Jean-Antoine Houdon's famous 1786 bust of Washington.
Mint mark positioned below olive branch wreath, above 'R' in QUARTER
Obverse Design: The obverse features Washington's left-facing portrait with "LIBERTY" above the head, "IN GOD WE TRUST" in the left field, and the date "1932" below. The portrait's details, particularly the hair curls above Washington's ear, are critical for both grading and detecting weak strikes.
Reverse Design: The reverse displays a modernistic heraldic eagle with spread wings, perched on a bundle of arrows with two olive branches below. The inscriptions "UNITED STATES OF AMERICA," "E PLURIBUS UNUM," and "QUARTER DOLLAR" complete the design. The reverse hub used for all 1932 quarters featured distinctively broad, deep rims—a diagnostic feature that was only used again for the "Light Motto" variety of the 1934 Philadelphia issue.
Mint Mark Location: For all Washington Quarters from 1932 to 1964, the mint mark appears on the reverse, positioned below the knot of the olive branch wreath and directly above the letter "R" in "QUARTER."
- 1932 (no mint mark): Philadelphia Mint, 5,404,000 minted
- 1932-D: Denver Mint, 436,800 minted—uses the distinctive "Small D" mint mark punch, which appears blob-like or filled
- 1932-S: San Francisco Mint, 408,000 minted (lowest mintage)
⚠️ Authentication Critical for Key Dates
The high values of the 1932-D and 1932-S make them among the most frequently counterfeited 20th-century U.S. coins. The most common forgery involves adding a "D" or "S" mint mark to a common 1932-P quarter. Professional third-party grading is essential for any purchase of these key dates.
1932 Washington Quarter Price Guide
The 1932 Washington Quarter market is defined by extreme value stratification based on mint mark and condition. All three issues are 90% silver with a melt value of approximately $8.81 (based on November 2025 spot prices), but numismatic values always exceed this floor—even for the most worn examples.
The three 1932 issues showing dramatic value differences in high grades
1932 (P) Philadelphia Mint
The Philadelphia issue is the most common 1932 quarter, with over 5.4 million struck. It remains affordable in circulated grades and serves as the accessible "type coin" for collectors. The 1932-P only becomes scarce in Gem (MS-65) condition and is a significant conditional rarity in Superb Gem (MS-67) grades, where PCGS population reports show only 16 examples certified at MS-67 and one finer (MS-67+).
| Grade | Value Range |
|---|---|
| G-4 | $8 – $11 |
| VG-8 | $9 – $10 |
| F-12 | $10 |
| VF-20 | $12 – $17 |
| EF-40 | $15 – $17 |
| AU-50 | $20 – $31 |
| MS-60 | $35 – $80 |
| MS-63 | $74 – $100 |
| MS-64 | $99 – $165 |
| MS-65 | $278 – $330 |
| MS-66 | $750 – $850 |
| MS-67 | $5,200 – $12,500+ |
Auction Record: $40,250 for an MS-67 example (Heritage Auctions, PCGS CoinFacts)
1932-D Denver Mint
The 1932-D is the conditional key to the entire Washington Quarter series. While its mintage of 436,800 is slightly higher than the 1932-S, it is significantly rarer and more valuable in all Mint State grades. The vast majority of the mintage was released into circulation during the Great Depression, resulting in an extremely low survival rate in uncirculated condition. The 1932-D is rare in Gem MS-65 condition and becomes a major "trophy coin" in MS-66, with PCGS population reports showing only two specimens graded at that level as of May 2024.
| Grade | Value Range |
|---|---|
| G-4 | $75 – $90 |
| VG-8 | $81 – $115 |
| F-12 | $104 – $190 |
| VF-20 | $133 – $150 |
| EF-40 | $230 – $300 |
| AU-50 | $336 – $400 |
| MS-60 | $995 – $1,100 |
| MS-63 | $1,695 – $1,850 |
| MS-64 | $2,878 – $3,500 |
| MS-65 | $8,138 – $10,500 |
| MS-66 | $83,750 – $85,000 |
Auction Record: $143,750 for an MS-66 example (PCGS Price Guide)
1932-S San Francisco Mint
With a mintage of only 408,000, the 1932-S is the mintage key (lowest mintage business strike) of the Washington Quarter series. It is scarce and valuable in all grades. However, it is more available in Mint State grades than the 1932-D because contemporary collectors saved it in larger numbers, recognizing its low mintage. PCGS estimates approximately 10% of the original mintage (about 40,000 coins) survives across all grades. The 1932-S is typically found with a soft strike, particularly on the central design elements.
| Grade | Value Range |
|---|---|
| G-4 | $75 – $85 |
| VG-8 | $90 – $100 |
| F-12 | $105 – $190 |
| VF-20 | $102 – $120 |
| EF-40 | $125 – $235 |
| AU-50 | $169 – $200 |
| MS-60 | $392 – $425 |
| MS-63 | $587 – $730 |
| MS-64 | $888 – $950 |
| MS-65 | $2,470 – $2,850 |
| MS-66 | $27,500 – $46,000 |
Auction Record: $45,500 for an MS-66 example (March 2020, PCGS Price Guide). Recent sales from 2021-2025 range $26,400 to $38,400, suggesting current market values may be closer to the NGC Price Guide figure of $27,500.
💡 Market Insight
The dramatic value increases at the MS-66 and MS-67 levels for all three 1932 issues reflect extreme conditional rarity. Population reports from PCGS and NGC show single-digit populations (or "Pop 2" for the 1932-D MS-66), making these grades highly sought after by registry set collectors and advanced numismatists.
Grading the 1932 Washington Quarter
Accurate grading of the 1932 Washington Quarter requires understanding the series' unique characteristics, particularly the distinction between circulation wear and weak strikes. The 1932 dies were known to produce coins with weakness on the highest design points—this is a manufacturing characteristic, not wear.
Circulated grade progression showing increasing detail preservation
Circulated Grades (G-4 through AU-58): On circulated examples, examine Washington's hair details, particularly the curls above his ear on the obverse. On the reverse, check the central breast feathers of the eagle. As grades improve from Good to About Uncirculated, progressively more detail should be visible in these areas. By AU-50, nearly all design details should be sharp with only slight friction on the highest points. Mint luster begins to appear in protected areas at AU-50 and becomes more extensive at AU-58.
Uncirculated grades showing luster and surface quality progression
Mint State Grades (MS-60 through MS-67): Mint State coins show no signs of circulation wear. Grading at these levels focuses on the quality and quantity of bag marks, surface preservation, strike quality, and luster intensity.
- MS-60 to MS-62: Full mint luster but numerous distracting contact marks, particularly on Washington's cheek and in the obverse fields
- MS-63: Moderate marks visible, but none severe. Good eye appeal with attractive luster
- MS-64: Few marks, mostly small and not in focal areas. Strong luster and good eye appeal
- MS-65 (Gem): Very few marks, none in focal areas. Excellent luster and strong eye appeal
- MS-66: Minimal marks barely visible without magnification. Exceptional luster and outstanding eye appeal
- MS-67 (Superb Gem): Virtually perfect surfaces with only the most minute marks visible under magnification. Blazing luster and extraordinary eye appeal
Common weak strike areas: Washington's hair curls and eagle's breast feathers
⚠️ Critical Grading Nuance: Weak Strike vs. Wear
The most important grading distinction for 1932 quarters is differentiating between circulation wear and a weak strike. The 1932 dies commonly produced coins with weakness on Washington's hair curls above his ear and the eagle's central breast feathers. This is NOT wear—it is a manufacturing characteristic. A professional grader confirms an uncirculated coin by verifying the presence of original mint luster in the protected fields, which would be absent on a worn coin. The 1932-S is particularly noted for typically showing a soft strike.
Strike Quality: A coin can be Mint State but poorly struck. Strike quality affects both eye appeal and value. A weakly struck MS-65 may be worth 10-20% less than a sharply struck example of the same grade. Look for full definition in Washington's hair and the eagle's feathers to identify a well-struck example.
Toning and Surface Quality: Original, attractive toning on silver coins can enhance value, while harsh cleaning, corrosion, or artificial toning significantly reduces value. Coins with problems are placed in "Details" holders by grading services (e.g., "PCGS AU Details - Improperly Cleaned") and typically trade for 50-80% less than problem-free coins in equivalent grades.
1932 Washington Quarter Die Varieties
Die varieties occur when working dies show doubling, repunching, or other diagnostic features that allow collectors to attribute specific varieties. Two die varieties have been documented for the 1932 Washington Quarter series, though only one carries significant collector interest and premium value.
FS-101 variety showing clear doubling on IN GOD WE TRUST and LIBERTY
1932 (P) Doubled Die Obverse (DDO) FS-101
This is the primary and most desirable die variety for the 1932 Washington Quarter. It is recognized by both the Fivaz-Stanton reference system (FS-101) and NGC's VarietyPlus system (VP-001).
Attribution Diagnostics: The 1932 DDO FS-101 is classified as a Class IV offset hub doubling. Strong and clear doubling is visible on the obverse motto "IN GOD WE TRUST" and the word "LIBERTY." Doubling is also apparent on the date "1932." The doubling on "IN GOD WE TRUST" is particularly dramatic and can be seen with a 5x loupe or even with the naked eye on high-grade examples.
Valuation: The FS-101 variety carries a significant premium over regular-strike 1932-P quarters. Auction data from GreatCollections shows 20 recorded sales with prices ranging from $56 for a circulated AU-53 example to $2,258 for an MS-66. The PCGS auction record is $3,055 for an MS-66 sold by Heritage Auctions in 2014.
| Grade Range | Value Range |
|---|---|
| AU-53 to AU-58 | $56 – $200 |
| MS-63 | $300 – $450 |
| MS-64 | $500 – $700 |
| MS-65 | $800 – $1,200 |
| MS-66 | $2,200 – $3,055 |
Source:GreatCollections auction archive and PCGS CoinFacts
1932-D Repunched Mint Mark (RPM) "D/D"
A "D over D" repunched mint mark variety for the 1932-D has been noted by some error-variety sources. However, this variety is not listed as a major, widely collected variety by PCGS or NGC, which focus their variety listings on issues from 1934 and later. This suggests the 1932-D RPM is either extremely minor in appearance or exceptionally rare.
Valuation: No reliable public pricing data is available for this variety. Its market status remains unclear, and collectors should exercise caution with any coins advertised as "1932-D RPM" without third-party authentication.
💡 Collecting Tip
When purchasing die variety coins, insist on third-party certification from PCGS or NGC with the variety explicitly listed on the holder label (e.g., "FS-101" or "VP-001"). This ensures proper attribution and protects against misidentification.
1932 Washington Quarter Mint Errors
Major mint errors from 1932 are exceedingly rare. The combination of limited mintages (particularly for the Denver and San Francisco issues) and the 93-year time span since production means surviving error coins command substantial premiums. Errors on the key date 1932-D and 1932-S issues are exceptionally valuable when they surface.
Broadstrike Errors
Identification: A broadstrike error occurs when the coin is struck without the retaining collar in place, causing the planchet to expand beyond its normal diameter. The resulting coin is wider than normal and has a plain (unreeded) edge instead of the standard reeded edge.
Confirmed Sales: Auction records exist for 1932-P broadstrike errors. In August 2024, Stack's Bowers sold a 1932 (P) broadstruck quarter graded MS-62 by PCGS for $1,440. A 1932 (P) uncentered broadstrike in MS-64 (PCGS) sold for $360.
Estimated Values:
- 1932-P Broadstrike: $360 – $1,440 (depending on centering and grade)
- 1932-D or 1932-S Broadstrike: Would be worth many multiples of these prices due to key date status
Off-Center Strike Errors
Identification: The coin was improperly seated in the coining press during the strike, resulting in a design that is not centered on the planchet. A portion of the design is missing, replaced by a blank, unstruck area. Off-center strikes between 10% and 70% off-center are most desirable, particularly when the date and mint mark remain visible.
Estimated Values:
- 1932-P struck 10-20% off-center: $50 – $150
- 1932-D or 1932-S with visible date and mint mark: $1,000 – $5,000+ (major rarity)
Lamination Errors
Identification: A lamination error is a planchet flaw where a piece of metal (a "flake") separates or peels from the coin's surface, either before or after the strike. Minor lamination errors appear as small raised or depressed areas, while dramatic "clamshell" laminations show a large flake still attached to the coin.
Estimated Values:
- 1932-P minor lamination: $30 – $60
- 1932-P dramatic "clamshell" lamination: $100 – $200
- 1932-D or 1932-S: Key date status remains primary value driver
Wrong Planchet / Off-Metal Errors
Identification: These extremely rare errors occur when a 1932 quarter die strikes a planchet (blank) intended for a different denomination. The resulting coin has the quarter's design but the wrong metal composition, weight, and size.
Valuation Framework (based on analogous Washington Quarter errors from later dates):
- Struck on 5¢ (Nickel) Planchet: The coin would be smaller, weigh 5.0 grams, and be copper-nickel composition. Estimated value: $300 – $500 in Mint State
- Struck on 1¢ (Cent) Planchet: The coin would be bronze, much smaller, and weigh approximately 3.11 grams. Estimated value: $1,200 – $1,500+
- Struck on 90% Silver Dime Planchet: This is an extremely rare error type. A 1932 quarter struck on a 1932 silver dime planchet would be silver but much smaller and thinner. A 1932-D or 1932-S example would be a landmark error coin, likely valued at $10,000 or more
⚠️ Authentication Essential
All significant mint errors should be authenticated by PCGS or NGC Error Division before purchase. Counterfeit and altered coins are common in the error market, and professional certification provides critical protection for buyers.
Authenticating 1932 Washington Quarters
Authentic 'Small D' mint mark vs common counterfeit characteristics
The high values of the 1932-D and 1932-S make them two of the most frequently counterfeited coins in 20th-century American numismatics. The most common alteration involves taking an inexpensive 1932-P quarter and adding a "D" or "S" mint mark to deceive buyers. Understanding authentication diagnostics is critical for protecting your investment.
Primary Counterfeit Method: Added Mint Marks
Forgers typically solder or mechanically punch a mint mark onto a genuine 1932-P quarter. Detection requires careful examination under magnification (at least 10x power). Look for microscopic tool marks, scratches, or discoloration from solder or flux around the mint mark area. The metal's surface texture should be consistent across the entire reverse—any signs of disturbance indicate possible tampering.
Incorrect Mint Mark Style
The 1932-D used a specific "Small D" punch that has a characteristic blob-like or filled appearance. Many counterfeits are created using a "Large D" punch from a different year or a mint mark style that doesn't match genuine 1932-D examples. Compare the mint mark to certified authentic examples in reference books or online databases. The 1932-D's distinctive "smeared" or filled mint mark appearance is often the result of ejection doubling and is a key authentication feature.
Inconsistent Wear and Toning
On circulated coins, genuine examples show consistent wear patterns and natural toning across the entire surface. Altered coins may exhibit artificial toning or discoloration specifically around the mint mark area where the forger attempted to disguise their work. The patina should flow naturally across the design—any abrupt color changes are suspicious.
Detecting Cleaned or Damaged Coins
Beyond outright counterfeits, collectors must also identify coins that have been improperly cleaned or damaged. Third-party grading services place these coins in "Details" holders with notations such as "Improperly Cleaned," "Scratched," or "Environmental Damage." Warning signs include unnatural, "blasted" luster with no natural patina, fine parallel hairline scratches from brushing or "whizzing," or a dull, lifeless surface. Details coins are unsuitable for investment or registry set collecting and typically trade for 50-80% less than problem-free coins in equivalent grades.
Mandatory Professional Grading
Due to the high fraud risk, professional third-party authentication from PCGS or NGC is considered mandatory when purchasing any 1932-D or 1932-S Washington Quarter. The cost of certification (typically $30-$100 depending on service level) is negligible compared to the risk of purchasing a counterfeit coin worth only its silver melt value. Never purchase an uncertified 1932-D or 1932-S based solely on photographs or dealer assurances.
Preserving Your 1932 Washington Quarter
All 1932 Washington Quarters are 90% silver and are susceptible to toning, corrosion, and environmental damage. Proper storage and handling are essential for maintaining the coin's condition and protecting its numismatic value.
Storage Recommendations: Store your coins in inert, archival-safe holders such as Mylar flips or in certified slabs from PCGS or NGC. Avoid paper envelopes or soft plastic holders containing PVC (polyvinyl chloride), as these materials contain sulfur and acids that cause black, damaging toning over time. For long-term storage, place holders in a cool, dry environment with stable temperature and humidity. Avoid attics, basements, or locations with significant temperature fluctuations.
Handling Best Practices: Always handle coins by their edges, never touching the obverse or reverse surfaces. Oils, acids, and salts from human skin can cause permanent damage and toning. Wear cotton gloves when handling high-grade or valuable specimens. Work over a soft, padded surface to prevent damage if a coin is accidentally dropped.
Cleaning Warning: Never attempt to clean a numismatic coin. Even gentle cleaning with soap, water, or commercial products will leave microscopic scratches that significantly reduce value. A "cleaned" designation from grading services typically results in a 50-80% value reduction. Natural toning, even if unattractive to some collectors, is always preferable to cleaning. If a coin requires professional conservation, consult with a major grading service's conservation department—never attempt home cleaning methods.
Insurance and Documentation: High-value coins such as the 1932-D and 1932-S should be photographed and documented with certification numbers. Consider adding numismatic coverage to your homeowner's insurance policy or obtaining specialized collectibles insurance. Keep purchase receipts and certification paperwork in a separate, secure location from the coins themselves.
Frequently Asked Questions
How much is my 1932 Washington Quarter worth?
Value depends entirely on the mint mark and grade. A 1932-P (no mint mark) in Good condition is worth $8-$11, while a Mint State example ranges from $35 to over $40,000 for MS-67. The key dates are far more valuable: a 1932-D ranges from $75 in Good condition to $143,750 in MS-66, while a 1932-S ranges from $75 to $45,500. All 1932 quarters contain 90% silver with a melt value of approximately $8.81, but numismatic value always exceeds this floor for collectible-grade coins.
How do I identify the mint mark on a 1932 Washington Quarter?
The mint mark is located on the reverse (back) of the coin, below the knot of the olive branch wreath and directly above the letter "R" in "QUARTER." A "D" indicates the Denver Mint, an "S" indicates San Francisco, and no mint mark means Philadelphia. The 1932-D features a distinctive "Small D" punch that appears blob-like or filled. Use a magnifying glass or loupe to clearly see the mint mark.
Why is the 1932-D more valuable than the 1932-S despite having a higher mintage?
While the 1932-S has a lower mintage (408,000 vs. 436,800 for the 1932-D), the 1932-D is the superior conditional rarity. The vast majority of 1932-D quarters were released into circulation during the Great Depression, resulting in an extremely low survival rate in Mint State condition. The 1932-S was saved in larger numbers by contemporary collectors who recognized its low mintage. This difference in survival rates makes the 1932-D significantly rarer and more valuable in uncirculated grades, with only two MS-66 specimens certified by PCGS as of 2024.
Should I get my 1932 Washington Quarter professionally graded?
Professional grading from PCGS or NGC is essential for any 1932-D or 1932-S due to widespread counterfeiting. For 1932-P quarters, grading is recommended for any coin that appears to be AU or better. The cost of grading (typically $30-$100) is justified by the authentication protection and the market premium that certified coins command. Uncertified key dates (1932-D and 1932-S) are virtually unsaleable to knowledgeable collectors and dealers.
What is the 1932 Doubled Die Obverse (FS-101) variety?
The 1932 DDO FS-101 is a die variety featuring strong doubling on the obverse motto "IN GOD WE TRUST" and the word "LIBERTY." It is classified as Class IV offset hub doubling. This variety carries significant premiums over regular-strike 1932-P quarters, ranging from $56 in AU condition to over $3,000 in MS-66. The doubling is visible with a 5x loupe and can sometimes be seen with the naked eye on high-grade examples.
How can I tell if my 1932-D or 1932-S is a counterfeit?
The most common counterfeit involves adding a mint mark to a 1932-P. Examine the mint mark area under 10x magnification for tool marks, scratches, or solder residue. The 1932-D should have a specific "Small D" punch that appears blob-like or filled. Compare the mint mark to certified examples in reference materials. Check for inconsistent wear or artificial toning around the mint mark. Due to the high fraud risk, never purchase an uncertified 1932-D or 1932-S—professional authentication from PCGS or NGC is mandatory.
What is a weak strike, and how does it affect value?
A weak strike occurs when insufficient pressure during minting results in incomplete detail on the coin's highest points, particularly Washington's hair curls and the eagle's breast feathers. This is a manufacturing characteristic, not circulation wear. A coin can be Mint State but weakly struck. Weak strikes are common on 1932 quarters, especially the 1932-S. Weakly struck coins typically trade for 10-20% less than sharply struck examples in the same grade because they have reduced eye appeal.
Can I clean my 1932 Washington Quarter to improve its appearance?
Never clean a numismatic coin under any circumstances. Even gentle cleaning with soap, water, or commercial products leaves microscopic scratches that are immediately visible under magnification. Grading services will designate cleaned coins as "Details" grades (e.g., "AU Details - Improperly Cleaned"), which typically reduces value by 50-80%. Natural toning, even if unattractive, is always preferable to cleaning. If professional conservation is needed, consult with a major grading service's conservation department.
What is the silver melt value of a 1932 Washington Quarter?
As of November 2025 (with silver at $48.70 per troy ounce), the melt value of a 1932 Washington Quarter is approximately $8.81. However, this represents only the absolute floor for severely damaged or non-collectible coins. All collectible-grade 1932 quarters, including the most common 1932-P in Good condition, have numismatic values that exceed the melt value. The key dates (1932-D and 1932-S) have numismatic values starting at $75-$90 in Good condition, making their silver content largely irrelevant to value.
Are there any proof 1932 Washington Quarters?
No. The U.S. Mint did not produce any proof coins in 1932. The proof coinage program, which had been dormant, did not resume until 1936. All 1932 Washington Quarters (from Philadelphia, Denver, and San Francisco) were business strikes intended for general circulation. Claims of "proof-like" surfaces on exceptional business strikes should not be confused with actual proof coins—no official proof 1932 quarters exist.
Price Guide Methodology
The values presented in this guide are synthesized from multiple authoritative sources including the PCGS Price Guide, NGC Price Guide, APMEX retail pricing, JM Bullion, L&C Coins, and documented auction results from Heritage Auctions, Stack's Bowers, and GreatCollections. All auction records cited include the source and date. Price ranges reflect the spread between conservative retail prices and recent market performance as of November 2025.
The numismatic market fluctuates based on precious metals prices, collector demand, and the availability of certified examples. Values for extremely high-grade coins (MS-66 and MS-67) are particularly volatile due to their extreme rarity and appeal to registry set collectors. Actual prices realized at auction can vary significantly based on eye appeal, strike quality, and market conditions at the time of sale.
Readers should view this guide as an educational resource for understanding market values, not as a guarantee of specific prices. When buying or selling 1932 Washington Quarters, especially key dates, consult with professional numismatists and obtain multiple valuations. All information is believed to be accurate as of the publication date, but market values change continuously. For the most current pricing, consult real-time resources such as greysheet bid values, live auction results, and current dealer inventory pricing.
